Dbx ZC-9 8 Position Zone Controller The Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS: The remote device shall provide rotary switch source selection for the ZonePro 1260 and 1261. The remote shall have DIP switch identification and connection to the device being controlled shall be via CAT 5 cable and RJ-45 connectors. The device shall be a ZC-9 remote control. OTHER SPECIFICATIONS: • Connectors: (2) RJ-45 • Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft. • Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft. • Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher. • Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065 SKU: DBXZC9V Category: Pro Audio Accessories Tag: Profesional Audio, Pro Audio DBX, DBX, Pro Audio Accessories, Aksesoris Pro Audio
