dbx ZC7 Mic Page Assignment Controller The Zone Controllers offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-7 is a programmable push -to-talk page assignment controller for the ZonePRO devices. ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS: The remote device shall provide programmable push-to-talk page assignment for the dbx ZonePRO devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-7 remote controller. OTHER SPECIFICATIONS: • Connectors: (2) RJ-45 • Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft. • Parallel Wiring using ZC-BOB: Up to Six Zone Controllers:: 1000 ft. • Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher. • Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065 SKU: DBXZC7V Category: Pro Audio Accessories Tag: Profesional Audio, Pro Audio DBX, DBX, Pro Audio Accessories, Aksesoris Pro Audio
