Detroit Diesel DD15 (2010–2014) “A4721400475 ” EGR Cooler

Precision Remanufacturing for DD15 ReliabilityEach Detroit Diesel DD15 EGR Cooler (OEM A4721400475) is remanufactured in-house by Turbo Kings to restore OEM-grade cooling efficiency and reliability.Every unit is fully disassembled and stripped to bare metal before entering a heated alkaline detergent flush, which clears out carbon, soot, and oil residue from coolant and exhaust channels. This process ensures full internal flow and maximum thermal performance.Following the flush, each cooler is placed in a 48-hour mild acid bath using a controlled citric/phosphoric solution to remove oxidation and coolant scale without weakening the metal.All components are inspected and, when necessary, TIG-weld re-fabricated to repair cracks or worn joints and restore sealing integrity.Each cooler then undergoes a 125 PSI submerged pressure test, verifying complete separation between coolant and exhaust circuits. Only coolers that pass this leak test move on to final rinsing and oven drying.What Makes a Turbo Kings Rebuild DifferentTurbo Kings applies the same industrial standards found in OEM rebuild centers — not quick-clean shortcuts.Our heated alkaline cleaning process safely dissolves heavy contamination without using solvents that can damage brazed joints.After descaling, each cooler is neutralized, rinsed, and oven-dried, ensuring it’s completely moisture-free before packaging.Our TIG-weld reconditioning restores strength and precision alignment so each cooler installs perfectly and performs consistently under high heat cycles.Every finished cooler is visually inspected for sealing flatness and internal cleanliness before leaving our facility.Why Fleets and Owner-Operators Trust Turbo KingsTurbo Kings rebuilds are engineered for longevity under real-world load conditions — where uptime is everything.OEM Fitment Guarantee – Direct bolt-on replacement for DD15 (2010–2014)Pressure Tested to 125 PSI – Validated against internal coolant/exhaust leaksCorrosion-Free Finish – Acid neutralized and oven-cured for long-term durabilityWeld-Reinforced Reliability – Repaired and pressure verified to outlast typical aftermarket coresWarranty: 6 Months / Unlimited MileageEvery cooler is built for confidence — tested, inspected, and certified by Turbo Kings technicians.Our Process at a GlanceComplete Disassembly & Inspection – Crack and warpage analysisHot Alkaline Flush – Removes oil, soot, and carbon buildup48-Hour Acid Descale – Clears oxidation and scaleTIG-Weld Repair – Rebuilds weak or cracked jointsPressure Test (125 PSI) – Submerged validation for leaksNeutralization & Oven Drying – Ensures corrosion-free internals